The main body of the engine, which integrates each cylinder and crankcase, is the supporting skeleton for installing pistons, crankshafts, and other parts and accessories.
The working conditions of the cylinder block are very bad. It has to withstand the rapid changes in pressure and temperature during combustion and the strong friction of the piston movement. Therefore, it should have the following properties:
① It has sufficient strength and rigidity, small deformation, and ensures the correct position of each moving part, normal operation, and low vibration and noise.
② It has good cooling performance, and there is a cooling water jacket around the cylinder so that the cooling water can take away the heat.
③ Wear-resistant to ensure that the cylinder block has sufficient service life.
1. Original factory supporting standard manufacturing
2. Strengthen product inspection: Clean the cylinder body by blowing air after routine cleaning to further remove impurities in the cylinder
product name: cylinder block
Main model: 612600900039/612600010837R, 612600011729/612600900029, WP10 61500010373B/61560010095B WD615 EURO-2, 61500010383S
a cope of use: Gearbox
Material: cast iron or aluminum alloy
Packing: plywood
Specification: 94*34*47cm，320kg
1. Apply to WP10, WD615 EURO-2
2. Warranty Period: 1 year
1. The upper cylindrical cavity of the cylinder block is the cylinder. It forms the combustion chamber together with the cylinder head and the piston and guides the piston to reciprocate.
2. The inner wall of the cylinder is cast with a cavity for storing and circulating coolant, called a water jacket, which is used to cool parts that work at high temperatures. A tappet chamber is provided on the side of the cylinder block to install the valve transmission parts.
Please Feel Free To Ieave Your Needs Here, A Competitive Quotation Will Be Provided According To Your Requirement.
English
